Tuesday Tips–Leaving your mark on rewoven chair seats

TUESDAY WEAVING TIPS — Whenever you get the chance to “leave your mark” on a chair seat that you are restoring or reweaving, be sure to do it. Here I’ve inserted my business card between the cardboard triangles used for stuffing a paper rush chair seat.

publicity-biz-card-rush-chair

Don’t pass up the opportunity to get free advertising for your caning business and at the same time, leave a bit of history for the next generation. You can also write the information on the flat side rails as a more permanent way to leave your mark.

sign-date-repairs-paper-rush-seat

If you are weaving a porch cane or wide binding cane seat, where the weaving goes around the rungs and is both on the top and bottom of the seat, you can either insert your business card in the “pocket” or you can write your name and date on one of the rails.

Over-the-rail or wide binding cane footstool

All will be covered up by the weaving, so only the next weaver will be aware of the information, but it’s been a real treat for me to make these discoveries after removing a seat that was last woven in say, 1945.

Depending on the type of chair seat you are working on and the type of material you are using to stuff the seat, you might want to consider also inserting a recent front page of your local newspaper that has the date and location for posterity also.

Another thing you might consider is applying a small return address label on the bottom of the chair seat, in the case of a rush seat for example,  or even on the front inside rail of a hole-to-hole cane chair.

biz-label-cane-chair

On the hole-to-hole cane seats, I prefer to adhere the label to the front inside rail, so they are not visible as you look at the chair seat. Sometimes if you put the label on the back inside rail, it can be seen and is a distraction.

wicker-woman-cane-repair-label

I didn’t trust the adhesive on the back of this mailing return address label, so I also applied a bit of carpenter’s yellow glue to the back of the label to make it stick better. As you can see, I rewove this cane seat when I was still in Zumbro Falls, MN way back in 1995 and the label is still there!

Well, I hope these Tuesday Weaving Tips have given you a little help in your chair caning business and that you’ll come back soon for more! What creative ways have you found to “leave your mark” on chair seats that you weave or reweave? Please leave your comments below.

Enjoy and Happy Weaving!

About The Author

4 thoughts on “Tuesday Tips–Leaving your mark on rewoven chair seats”

  1. I use my handy staple gun to attach my business cards to the bottoms of the chairs I cane. I also date them in case they come back to me someday to be redone.

    1. I date my chairs too Cheryl, but guess I missed the one I took the photo of, didn’t I? Using the staple gun will work on the large wide rails, but not so well on the round dowels though.

  2. Hi Cathryn, I have even had my customers write a history of a heritage chair and put their story inside the weaving. They love it !
    Good idea with the address labels, thanks !

    1. That would be very interesting to find a history of the chair and especially about the weaver, inside a chair seat. Good idea! Thanks for posting, Jan. Yeah, it seems like we always have address labels handy, don’t we? And I’ve gone so far as to make up my own, with a picture of me weaving on the left side! Then with my antler basket address labels, I have a picture of the first antler basket I ever made, “First Attempt.” It was for my husband way back in 1990 and he won’t let me sell or give it away. It’s predominantly displayed here in my studio and goes with me to every antler basket class I teach.

Leave a Comment

Your email address will not be published. Required fields are marked *


Scroll to Top